Packages
Packages
Build the Sensu output plugin (sends metrics to Sensu Core, an open-source monitoring project)
| Use Flag | Description |
|---|---|
| collectd_plugins_swap | Build the swap input plugin (collects amount of memory currently written to swap) |
| collectd_plugins_ted | Build the ted input plugin (connects to The Energy Detective and reads the current power over connected power lines) |
| collectd_plugins_procevent | Build the procevent input plugin (monitors process starts/stops via netlink library) |
| collectd_plugins_target_set | Build the target_set filter plugin |
| collectd_plugins_write_log | Build the write_log output plugin (writes metrics to a file) |
| collectd_plugins_logparser | Build the logparser plugin (allows for filtering and parsing log messages) |
| collectd_plugins_write_kafka | Build the Kafka output plugin (sends metrics to Apache Kafka) |
| collectd_plugins_md | Build the md input plugin (reports the number of disks in various states in Linux software RAID devices) |
| collectd_plugins_wireless | Build the wireless input plugin (collects signal quality, signal power and signal-to-noise ratio for wireless LAN cards) |
| collectd_plugins_cpufreq | Build the cpufreq input plugin (collects the current CPU's frequency) |
| collectd_plugins_apcups | Build the apcups input plugin (reads various statistics about a connected uninterruptible power supply (UPS)) |
| collectd_plugins_irq | Build the irq input plugin (collects the number of times each interrupt has been handled by the operating system) |
| collectd_plugins_fscache | Build the fscache input plugin (collects information about the file-system based caching infrastructure for network file-systems and other slow media) |
| collectd_plugins_processes | Build the processes input plugin (collects the number of processes, grouped by their state or detailed statistics about selected processes) |
| collectd_plugins_match_value | Build the match_value filter plugin |
| collectd_plugins_sysevent | Build the rsyslog input plugin (collects system events from rsyslog) |
| collectd_plugins_csv | Build the csv output plugin (writes to comma separated values (CSV) files) |
| collectd_plugins_users | Build the users input plugin (counts the number of users currently logged into the system) |
| collectd_plugins_write_syslog | Build the Syslog output plugin (sends metrics in CEE-enhanced syslog message format) |
| collectd_plugins_vserver | Build the vserver input plugin (collects information about the virtual servers running on a system, using Linux-Vserver) |
| collectd_plugins_write_graphite | Build the write_graphite output plugin (stores values in Carbon, the storage layer of Graphite) |
| collectd_plugins_notify_email | Build the notify_email output plugin (uses net-libs/libesmtp to send notifications to a configured email address) |
| collectd_plugins_varnish | Build the varnish input plugin (collects information about Varnish) |
| collectd_plugins_ethstat | Build the ethstat input plugin (reads performance statistics directly from ethernet cards) |
| collectd_plugins_nginx | Build the nginx input plugin (collects number of requests handled and the number of current connections by connection state by the nginx daemon) |
| collectd_plugins_logfile | Build the logfile output plugin (receives log messages from collectd and writes them to a text file) |
| collectd_plugins_teamspeak2 | Build the teamspeak2 input plugin (collects traffic statistics from a teamspeak2 instance) |
| collectd_plugins_target_notification | Build the target_notification filter plugin |
| collectd_plugins_turbostat | Build the turbostat input plugin (reads CPU frequency and C-state residency on modern Intel turbo-capable processors) |
| collectd_plugins_notify_desktop | Build the notify_desktop output plugin (uses x11-libs/libnotify to display notifications to the user) |
| collectd_plugins_virt | Build the (lib)virt input plugin (collects statistics about virtualized guests on a system) |
| collectd_plugins_uptime | Build the uptime input plugin (keeps track of the system uptime) |
| collectd_plugins_netlink | Build the netlink input plugin (collects statistics for interfaces, qdiscs, classes and filters using netlink socket) |
| collectd_plugins_routeros | Build the routeros input plugin (collects information from devices running RouterOS) |
| collectd_plugins_write_influxdb_udp | Build the InfluxDB UDP output plugin (sends metrics to InfluxDB using UDP) |
| collectd_plugins_rrdcached | Build the rrdcached input/output plugin (connects to rrdcached and submits updates for RRD files) |
| collectd_plugins_interface | Build the interface input plugin (collects information about the traffic, packets per second and errors of interfaces) |
| collectd_plugins_cpusleep | Build the cpusleep input plugin (measures time spent by CPU in deep sleep mode) |
| collectd_plugins_cpu | Build the cpu input plugin (collects the amount of time spent by the CPU in various states) |
| collectd_plugins_rrdtool | Build the rrdtool output plugin (writes values to RRD-files) |
| collectd_plugins_statsd | Build the statsd input plugin (accepts statsd-type metrics from a UDP socket) |
| collectd_plugins_snmp | Build the snmp input plugin (reads values from network devices using SNMP) |
| collectd_plugins_ipmi | Build the ipmi input plugin (reads hardware sensors from servers using the Intelligent Platform Management Interface (IPMI)) |
| collectd_plugins_load | Build the load input plugin (collects the system load) |
| collectd_plugins_nut | Build the nut input plugin (collects UPS statistics using the Network UPS Tools) |
| collectd_plugins_hugepages | Build the hugepages input plugin (collects the number of used and free hugepages on Linux) |
| collectd_plugins_hddtemp | Build the hddtemp input plugin (collects the temperature of disks from hddtemp daemon) |
| collectd_plugins_madwifi | Build the madwifi input plugin (collects information about Atheros wireless LAN chipsets from the MadWifi driver) |
| collectd_plugins_filecount | Build the filecount input plugin (counts the number of files in a directory and all its subdirectories) |
| collectd_plugins_vmem | Build the vmem input plugin (collects information about the virtual memory subsystem of the kernel) |
| collectd_plugins_curl_xml | Build the curl_xml input plugin (reads files using net-misc/curl and parses it as Extensible Markup Language (XML)) |
| collectd_plugins_check_uptime | Build a plugin to notify about uptime reset |
| collectd_plugins_oracle | Build the oracle input plugin (executes SQL statements against Oracle database systems) |
| collectd_plugins_entropy | Build the entropy input plugin (collects the available entropy on a system) |
| collectd_plugins_slurm | Build the slurm input plugin (collects metrics from the SLURM workload manager) |
| collectd_plugins_mcelog | Build the mcelog input plugin (subscribes to Machine Check Exceptions (MCE) and dispatches notifications) |
| collectd_plugins_uuid | Build the uuid plugin (tries hard to determine the UUID of the system it is running on) |
| collectd_plugins_notify_nagios | Build the notify_nagios output plugin (sends notifications to Nagios as a passive check result) |
| collectd_plugins_numa | Build the numa input plugin (collects statistics of the Linux Non-Uniform Memory Access (NUMA) subsystem) |
| collectd_plugins_table | Build the table input plugin (parses table-like structured plain text) |
| collectd_plugins_write_prometheus | Builds the Prometheus output plugin (starts an internal webserver on port 9103 (configurable) and accepts scrape requests from Prometheus) |
| collectd_plugins_match_regex | Build the match_regex filter plugin |
| collectd_plugins_olsrd | Build the olsrd input plugin (reads information about the Optimized Link State Routing daemon) |
| collectd_plugins_write_sensu | Build the Sensu output plugin (sends metrics to Sensu Core, an open-source monitoring project) |
| collectd_plugins_contextswitch | Build the contextswitch input plugin (collects the number of context switches done by the operating system) |
| collectd_plugins_curl_json | Build the curl_json input plugin (queries JavaScript Object Notation (JSON) data using net-misc/curl and parses it according to the user's configuration using dev-libs/yajl) |
| collectd_plugins_nfs | Build the nfs input plugin (collects information about the usage of the Network File System (NFS)) |
| collectd_plugins_sigrok | Build the sigrok input plugin (reads measurements from any supported hardware from sigrok project) |
| collectd_plugins_gmond | Build the gmond input plugin (receives data from gmond, the client daemon of the Ganglia project) |
| collectd_plugins_thermal | Build the thermal input plugin (reads ACPI thermal zone information) |
| collectd_plugins_disk | Build the disk input plugin (collects performance statistics of disks and, where supported, partitions) |
| collectd_plugins_openldap | Build the OpenLDAP input plugin (reads monitoring information from OpenLDAP's cn=Monitor subtree) |
| collectd_plugins_drbd | Build the Linux's Distributed Replicated Block Device (DRBD) input plugin (reads Linux's DRBD statistics) |
| collectd_plugins_match_timediff | Build the match_timediff filter plugin |
| collectd_plugins_multimeter | Build the multimeter input plugin (reads a voltage or current from a multimeter connected to a serial bus) |
| collectd_plugins_snmp_agent | Build an input plugin which implements an SNMP AgentX subagent that receives and handles queries from SNMP master agent and returns configured metrics |
| collectd_plugins_buddyinfo | Build the buddyinfo input plugin (collects statistics from /proc/buddyinfo) |
| collectd_plugins_match_hashed | Build the match_hashed filter plugin |
| collectd_plugins_dns | Build the dns input plugin (collects statistics of your DNS traffic on port udp/53 using net-libs/libpcap) |
| collectd_plugins_dbi | Build the dbi input plugin (executes SQL statements on databases and reads back the result) |
| collectd_plugins_smart | Build the S.M.A.R.T input plugin (collects S.M.A.R.T statistics from disk drives) |
| collectd_plugins_synproxy | Build the Linux SYNPROXY input plugin (collects metrics from /proc/net/stat/synproxy) |
| collectd_plugins_conntrack | Build the conntrack input plugin (tracks the number of entries in Linux's connection tracking table) |
| collectd_plugins_memory | Build the memory input plugin (collects physical memory utilization) |
| collectd_plugins_memcachec | Build the memcachec input plugin (queries one or more given pages from a memcached instance and parses the returned data according to user specification) |
| collectd_plugins_onewire | Build the onewire (1-Wire) input plugin (collects temperature information from sensors) |
| collectd_plugins_aggregation | Build the aggregation plugin (aggregates multiplte values into a single value) |
| collectd_plugins_ubi | Build the ubi input plugin (collects block state for flash memory devices with UBIFS) |
| collectd_plugins_redis | Build the Redis input plugin (collects usage information from Redis instances) |
| collectd_plugins_powerdns | Build the powerdns input plugin (collects statistics from the PowerDNS name server or recursor via control socket) |
| collectd_plugins_mbmon | Build the mbmon input plugin (collects information from mainboard sensors) |
| collectd_plugins_java | Build the java input plugin (embeds a JVM into collectd for writing plugins) |
| collectd_plugins_write_stackdriver | Build the Stackdriver output plugin (stores metrics in Google Stackdriver) |
| collectd_plugins_bind | Build the bind input plugin (collects statistics from bind instances) |
| collectd_plugins_ping | Build the ping input plugin (measures network latency) |
| collectd_plugins_write_tsdb | Build the TSDB output plugin (writes metrics to OpenTSDB, an open-source distributed time-series database based on Apache HBase) |
| collectd_plugins_xencpu | Build the XEN CPU input plugin (collects XEN Hypervisor CPU stats using app-emulation/xen-tools) |
| collectd_plugins_curl | Build the curl input plugin (reads streams using net-misc/curl and then parses them according to the configuration) |
| collectd_plugins_fhcount | Build the file handles input plugin (reports the number of used file handles) |
| collectd_plugins_mqtt | Build the MQTT plugin (sends metrics to and/or receives metrics from an MQTT broker using app-misc/mosquitto) |
| collectd_plugins_email | Build the email input plugin (opens a UNIX domain socket and starts accepting connections on that socket) |
| collectd_plugins_df | Build the df input plugin (collects file system usage information, i. e. basically how much space on a mounted partition is used and how much is available) |
| collectd_plugins_ipvs | Build the IPVS input plugin (collects statistics from Linux IP Virtual Server) |
| collectd_plugins_tail | Build the tail input plugin (follows logfiles, e.g. tail -f) |
| collectd_plugins_ascent | Build the ascent input plugin (reads and parses the statistics page of Ascent) |
| collectd_plugins_gpu_nvidia | Build the NVIDIA GPU input plugin (collects stats from NVIDIA GPU) |
| collectd_plugins_chrony | Build the chrony input plugin (collects statistics from a chrony NTP server) |
| collectd_plugins_network | Build the network input/output plugin (send values to other and/or receive values from from other collectd instances) |
| collectd_plugins_cgroups | Build the cgroups input plugin (collects CPU accounting information for processes in a cgroup) |
| collectd_plugins_memcached | Build the memcached input plugin (collects statistics from memcached daemon) |
| collectd_plugins_target_scale | Build the target_scale filter plugin |
| collectd_plugins_postgresql | Build the postgresql input plugin (executes SQL statements against a PostgreSQL database) |
| collectd_plugins_modbus | Build the Modbus input plugin (reads register values from a Modbus "slave" via Modbus/TCP) |
| collectd_plugins_serial | Build the serial input plugin (collects the traffic on serial interfaces) |
| collectd_plugins_perl | Build the perl language binding plugin (embeds a Perl interpreter into collectd for writing plugins) |
| collectd_plugins_write_redis | Build the Redis output plugin (stores values in Redis) |
| collectd_plugins_log_logstash | Build the Logstash output plugin (writes collectd logs and events as Logstash JSON formatted events) |
| collectd_plugins_capabilities | Build the capabilities input plugin (collects platform capabilities decoded from the hardware subsystems) |
| collectd_plugins_mysql | Build the mysql input plugin (collects values from 'SHOW STATUS' command of a MySQL server) |
| collectd_plugins_iptables | Build the iptables input plugin (collects statistics from a ip_tables based packet filter) |
| collectd_plugins_exec | Build the exec input/output plugin (executes scripts / applications and reads values back) |
| collectd_plugins_python | Build the python language binding plugin (embeds a Python interpreter into collectd for writing plugins) |
| collectd_plugins_protocols | Build the protocols input plugin (collects information about the network protocols supported by the system) |
| collectd_plugins_gps | Build the gps input plugin (collects number of satellites seen by a GPS receiver using sci-geosciences/gpsd) |
| collectd_plugins_threshold | Build the threshold plugin (checks values against configured thresholds and creates notifications if values are out of bounds) |
| collectd_plugins_apache | Build the apache input plugin (collects statistics from Apache's mod_status module) |
| collectd_plugins_unixsock | Build the unixsock input/output plugin (opens a UNIX domain socket and accepts connections) |
| collectd_plugins_tail_csv | Build the tail_csv input plugin (follows and parses CSV files, e.g. tail -f *.csv) |
| collectd_plugins_pcie_errors | Build an input plugin which reports the PCIe errors |
| collectd_plugins_amqp | Build the AMQP output plugin (transmits or receives values collected by collectd via the Advanced Message Queuing Protocol (AMQP)) |
| collectd_plugins_openvpn | Build the openvpn input plugin (reads the status file printed by OpenVPN) |
| collectd_plugins_zfs_arc | Build the ZFS ARC input plugin (reports information such as the cache size, the various hits and misses (also as a ratio) and the transferred data) |
| collectd_plugins_tcpconns | Build the tcpconns input plugin (collects numbers of TCP connections to or from a specified port) |
| collectd_plugins_ovs_events | Build an input plugin which reports link state changes from Open vSwitch (OVS) |
| collectd_plugins_ceph | Build the Ceph input plugin (collects statistics from the Ceph distributed storage system) |
| collectd_plugins_lua | Build the LUA language binding plugin (uses dev-lang/lua) for writing plugins |
| collectd_plugins_sensors | Build the sensors input plugin (reads hardware sensors from lm-sensors) |
| collectd_plugins_write_http | Build the write_http output plugin (sends metrics to a web-server using HTTP POST requests) |
| collectd_plugins_ipc | Build the IPC input plugin (collects information related to shared memory) |
| collectd_plugins_syslog | Build the syslog output plugin (receives messages from collectd and dispatches them to syslog) |
| collectd_plugins_battery | Build the battery input plugin (collects the battery's charge, the drawn current and the battery's voltage) |
| collectd_plugins_zookeeper | Build the zookeeper input plugin (reads data from Apache Zookeeper MNTR command) |
| collectd_plugins_match_empty_counter | Build the match_empty_counter filter plugin |
| collectd_plugins_ovs_stats | Build an input plugin which reports bridge and interface statistics from Open vSwitch (OVS) |
| collectd_plugins_write_mongodb | Build the MongoDB output plugin (stores values in MongoDB) |
| collectd_plugins_ntpd | Build the ntpd input plugin (collects statistics from a NTP server) |
| collectd_plugins_connectivity | Build the connectivity input plugin (monitors interface up/down status via netlink library) |
| collectd_plugins_target_replace | Build the target_replace filter plugin |